Headquarters:
mageba sa
Trafostrasse 1
8180 Bulach
Switzerland
Tel: +41-44-872 40 50
Fax:
The Australian railway company ARTC (Australian Rail Track Corporation) knows the costs of bearing replacement work on the bridges across its network. These costs are typically considerably higher than arise in the case of a comparable road bridge, due to rail-specific challenges such as the expense and difficulties of re-routing or stopping rail traffic, and the more complex safety procedures and infrastructure associated with railway transport. The relevant ARTC design and construction specification therefore stipulated that bearings used in this structure must be fabricated from stainless steel rather than carbon steel – minimising the risk of corrosion and therefore maximising the service life that might be expected in this regard.
Although the vast majority of the steel bearings produced by mageba over the last almost six decades have predominantly used steel of the carbon type, the RESTON®SPHERICAL bearings required for the Gawler River Rail Bridge near Adelaide in southern Australia were not the first stainless steel bearings mageba has produced – previous examples including the North Manama Causeway in Bahrain (pot bearings), the JTI Headquarters building in Switzerland (spherical bearings) and St. Patrick’s Footbridge in Canada (linear rocker bearings). However, it is still very rare for projects to specify that structural bearings should be of stainless steel, so it is special when the opportunity comes along to design and fabricate using this quite different material.
While structural bearings of stainless steel are generally more expensive than carbon steel alternatives, their use may well substantially reduce long-term costs by minimising the need to replace them as a result of a longer service life – especially when indirect costs such as traffic management and traffic disruption are considered. And even more so when the environmental benefits of maximising service life are taken into account – benefits that we build upon by manufacturing as locally as possible to minimise transport, with these bearings fabricated in our Australian production facility and tested in our Australian NATA-certified testing laboratory.
Bridge designer: Tonkin Consulting Pty Ltd
Contractor: Bardavcol Pty Ltd
Owner: Australian Rail Track Corporation (ARTC)